CSL CS101-2 Скачать руководство пользователя страница 204

Страница: 204 / 213

CSL CS101-2 EPC CLASS 1 GEN 2 RFID HANDHELD READER

USER'S MANUAL, VERSION 1.0

203

Interrogators is large relative to the number of available channels (for example, 50 active

Interrogators operating in 50 available channels).

Duplicate elimination time

Time span of a duplicate elimination cycle, within which duplicate tags will be removed.

Duplicate Elimination Triggering Method

The method used to trigger inventory with duplicate elimination. See also autonomous time

trigger and polling trigger by client.

Estimated tag time in field

An estimation of how long a tag will remain within the read zone of antenna

Event

An event defines action to be performed for a specific triggering logic. See also inventory

enabling trigger, trigger, inventory disabling trigger, and resultant action.

Extended temperature range

–40 °C to +65 °C (see nominal temperature range).

Full-duplex communications

A communications channel that carries data in both directions at once. See also half-duplex

communications.

Half-duplex communications

A communications channel that carries data in one direction at a time rather than in both

directions at once. See also full-duplex communications.

Instant alert to server

Collected tag information are sent to server immediately as it is read

Inventoried flag

A flag that indicates whether a Tag may respond to an Interrogator. Tags maintain a separate

inventoried flag for each of four sessions; each flag has symmetric A and B values. Within any

given session, Interrogators typically inventory Tags from A to B followed by a re-inventory of

Tags from B back to A (or vice versa).

Inventory enabling trigger

Содержание CS101-2




















































































































































































































Результаты поиска

Содержание CS101-2

Отзывы:

CSL CS101-2, Руководство пользователя, Страница: 204 / 213

Результаты поиска

Содержание CS101-2

Отзывы: