9
English
5. Control displays
If you operate a multi-user SAT system with Quattro LNB, you need to measure
the polarisation plane (13V vertical, 18V horizontal) to find the correct connection
to the multi-switch. The control display enables you to determine the polari
-
sa-tion. The satellite finder also has LEDs to indicate the switch signal (22 KHz on
/ 0 Hz off).
6. Safety instructions and disclaimer
Do not attempt to service this product by yourself as opening or removing covers
may result in fire, electric shock or equipment damage. The product is only
disconnected from the voltage system when the plug has been removed from the
socket. Please avoid any contact to the electric current. Disregard of tis warning
could lead to coming into contact with the operating voltage, or could generate a
short circuit. Pull out the plug before lightning storm or if you do not regularly use
this product, to prevent a short- circuit. This device is only licensed for indoor use
and dry areas. Please protect it from water, rain, snow or high humidity and keep
it away from high temperature and direct sunlight.
Do not expose this product to extreme and sudden changes of temperature or
heavy vibrations; this may lead to damage to the electronic part of this unit.Check
the product for signs of damage before putting it in operation. In case the device
received any damage, it should not be used. Please contact our customer sup-
port. Please observe the relevant national provisions and legal restrictions. Do not
use the device for anything other than intended and as described in the manual.
Any attempt of repairs or alterations by someone other than the original supplier
will invalidate the guarantee and result in refusal of warranty claims. The machine
may only be used by persons who are familiar with the operating manual and the
applicable regulations concerning working safety and accident prevention.
