10
English
7. Connecting the Gamepad
Please open the controller menu (JoyCon symbol) on the switch and then select
"Change grip/sequence".
Please keep the Home button on the controller pressed for 5 seconds until all four
LEDs start flashing very quickly.
Note: Before the LEDs start flashing quickly, they glow slowly at first. At this point,
you have to continue pressing the button until the LEDs shift from slow to fast flash-
ing.
The coupling with the switch will now take place. The switch display shows the
controller.
Note: The supplied USB type C cable can be used only to charge the gamepad.
8. Resetting the device
To reset the controller completely, press the "RESET" button on the back of the
device using a thin, pointed and long object. Insert this object through the small
opening in the back of the device. Once you insert the long object and press the
"RESET" switch, the device turns off and is reset.
9. Safety instructions and disclaimer
Never try to open the device to undertake any repairs or modifications. Avoid con
-
tact with the mains voltage. Do not short-circuit the product. The device is not
approved for outdoor use. Please use it only in dry places. Protect it from high
humidity, water and snow. Keep the device away from high temperatures.
Do not expose the device to sudden changes in temperature or strong vibrations,
as this could damage the electronic components. Check the device for any damage
before using it. The device should not be used if it was subject to impact or has
been damaged in some other manner. Please comply with the local regulations
and restrictions.
