CSL 20201113SZ025, Руководство пользователя

Страница: 8 / 24

8
English
Now look for a free USB 30 and USB 2.0 socket on the main board or on your
controller expansion card. Usually such a socket will be labelled “USB XX”. Please
make use of your main board manual to help you. The next step is to connect the
USB cable of the card reader to the free sockets.
The cable can only be connected in one direction. Please do not use force.
4. Driver installation
Driver installation takes place fully automatically. The card reader is ready for
use within a few minutes after the system starts up. Please carry out a Windows
update if the card reader is not detected/installed.
Please Note!
5. Safety instructions and disclaimer
VPlease never try to perform repairs or conversions of your device yourself. Avoid
contact with the power grid. The product is only voltage-free once it has been
unplugged. Always ensure that you are grounded before you touch electronic
components. This will prevent damage caused by electrostatic discharge from
your body.
Electrostatic discharge (ESD) can cause irreparable damage to your device and to
all the connected hardware components!
Installation of the product takes place at your own risk.
Please have the installation of the device performed by a specialised company if
you do not have any technical and practical experience in the field of computers/
electrotechnology. The manufacturer cannot be held liable for any direct or
indirect damage caused by improper installation or use.
It is the customer’s responsibility to back up any data.
The device has not been approved for outdoor use. It should therefore be used
only in dry areas. Protect it against high humidity levels, water and snow. Always
keep the device away from high temperatures.