CSI CARDPIN1, Руководство по установке

Страница: 12 / 60

CSI Key/Card Readers Installation Guide
6 CSI Readers
(with LED up) and secure key/card reader in mounting hole with
6
⁄
32
"
(4.8 mm) screw of appropriate length as shown in Figure 4 .
b. Locate and make the cutout (large enough to allow access to the key/card
reader) in the jamb or mullion opposite the key/card reader mounting hole.
Make required electrical connections, then position (with LED up) and secure
key/card reader in mounting hole using U-bracket and
6
⁄
32
" (4.8 mm) screw of
Figure 3. Key/Card Reader Mounting Hole
Figure 4. Installation Using Door Jamb or Mullion
Door Jamb
or Mullion
Door Jamb
or Mullion
Cut Out
Key Reader
Mounting
Hole Cut Out
Key Reader
Mounting
Hole
1.60"
(4.06 cm)
1.30"
(3.30 cm)
1.30"
(3.30 cm)
3.60"
(9.14 cm)
Key/Card
Reader
6
/
32
" (4.8 mm)
Screw
9
/
64
" (3.6 mm)
Screw Hole
Door Jamb or Mullion