CSI Alfa Laval Unique-TO Скачать руководство пользователя страница 9

Страница: 9 / 62

ALFA LAVAL UNIQUE MIXPROOF TANK OUTLET VALVE INSTRUCTION MANUAL—REV 8/21

3 Installation

Study the instructions carefully and pay special attention to the warnings!
The valve has ends for welding as standard but can also be supplied with fittings.

Stteepp 88
While valve body is welded, it is recommended to store the valve
safely in the box together with valve parts.

1. Place actuator and valve parts in the box.

2. Add supports.

3. Close, re-tape and store the box.

VIIS

E!!

Mark the valve body and box with the same number before
intermediate storage.

TD 449-300_1

3.2 Recycling information

•• U

Unnppaacckkiinngg

- Packing material consists of wood, plastics, cardboard boxes and in some cases metal straps

- Wood and cardboard boxes can be re-used, recycled or used for energy recovery

- Plastics should be recycled or burnt at a licensed waste incineration plant

- Metal straps should be sent for material recycling.

•• M

Maaiinntteennaannccee

- During maintenance, oil and wearing parts in the machine are replaced

- All metal parts should be sent for material recycling

- Worn out or defective electronic parts should be sent to a licensed handler for material recycling

- Oil and all non-metal wear parts must be disposed off in agreement with local regulations

•• S

Sccrraappppiinngg

- At end of use, the equipment must be recycled according to the relevant, local regulations. Besides the equipment itself, any

hazardous residues from the process liquid must be considered and dealt with in a proper manner. When in doubt, or in the

absence of local regulations, please contact your local Alfa Laval sales company

3.3 General installation

Stteepp 11

- Always read the technical data thoroughly (see 6 Technical data).

- Always release compressed air after use.

- Never touch the clip assembly or the actuator piston rod if the actuator is supplied with compressed air

(see the warning label)

UTTIIO

N!!

- Fit the supplied warning label on the valve so that it is normally visible.

- Alfa Laval cannot be held responsible for incorrect installation

OTTE

E!!

- The leakage outlet must be turned downwards!

CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | [email protected] | 417.831.1411

Содержание Alfa Laval Unique-TO































































Результаты поиска

Содержание Alfa Laval Unique-TO

Отзывы:

Бренды по названию

Популярные бренды

CSI Alfa Laval Unique-TO, Инструкция по эксплуатации

Результаты поиска

Содержание Alfa Laval Unique-TO

Отзывы:

Бренды по названию

Популярные бренды