CSI 7798 I/SITE LAN, Руководство по установке

Страница: 42 / 56

Setup and Operation Installation Guide
36 7798 I/SITE LAN
The Slave ATS screen displays the following fields:
✦
The Master Command and Master Time are for your information, they can not be
edited.
✦
“>” — press to select the entry to be edited.
✦
Reaction — use the
+
/
–
keys to cycle between Mirror/Optimize/Ignore, to select the
slave point’s reaction to the Master point action, then press
Done
to store change,
or
ESC
to reject the change.
✦
Adjustment (Min) — use the
+
/
–
keys to toggle up or down to select the number of
minutes (–128 to +127) the slave point action deviates from the Master point
action, then press
Done
to store the change, or
ESC
to reject change.
When editing is complete, press
Done
to return to the ATS Edit screen and press
Done
again to save changes and exit.
Resident I/O – edit menu
The Resident I/O – Edit screen (see Figure 30 ) is accessed through the Parameter Edit
screen. You can edit only the High and Low alarm limits for analog input points.
✦
Select the point you want to edit from the point summary screen that displays after
selecting Resident I/O.
✦
“>” — select the line to be edited (High or Low limit alarm), the standard edit
menu displays (see
Figure 17 on page 27 ).
✦
Press the left/right arrow keys to highlight the character to be changed.
✦
Press the
+
/
–
keys to toggle up or down to the desired limit (0–9), then press
Done
to store the change.
When editing is complete, press
Done
to save the changes and exit or
ESC
to exit without
saving, thus retaining the previous settings.
DCU Setup edit menu
The DCU Setup edit menu (see Figure 31 ) is accessed through the Parameter Edit screen.
If the 7798 is at boot control, the DCU Setup edit menu is accessed directly from the
Banner screen.
The first two screens display the DCU setup edit menu. The third screen displays DCU
status (refer to “DCU Status” on page 38). The first DCU Setup edit screen displays only
the first four rows. Using
PgUp
or
PgDn
displays the previous/remaining rows. Press
>
to select an entry for editing. When selecting
Date
,
Time
, or
Station address
, the stan-
dard edit menu displays.
Figure 30. Resident I/O – Edit Screen
F4
F2
F3
F1
F8
F6
F7
F5
Name Kitchen Temp
ADDRESS 0300AI ESC
> HIGH LIMIT ALARM 70
> LOW LIMIT ALARM 75