CSI Wireless ABX-3, Справочное руководство

Страница: 90 / 113

ABX-3 / MBX-3 Reference Manual 70
Optionally, the Status Line A query can be issued requesting the output
of the response message at a specified output rate. It has the following
format, where T is the output period in seconds:
$PCSI,1,T<CR><LF>
ABX-3 Response:
$PCSI,ACK,1
$PCSI,CS0,PXXX-Y.YYY,SN,fff.f,M,ddd,R,SS,SNR,MTP,Q,ID,H,T
Cycling receiver power discontinues the output of this message.
Additionally, message output can be halted by issuing the
$PCSI,1<CR><LF> query without the output period field.
The response message has the same format as discussed above. In
addition to this modified version of the Status Line A command, an
additional S field may be placed after the T field, resulting in the
following command:
$PCSI,1,T,S<CR><LF>
The S field is not a variable and specifies that the output of the Status
Line A message should continue after the power has been cycled. To
return the receiver to the defaults, a $PCSI,1<CR><LF> query must be
sent to the ABX-3 receiver.
5.8.2.3 ABX-3 Status Line B, Channel 1 ($PCSI,2)
This query is only valid for the ABX-3. It commands the ABX-3 to
output a selection of parameters related to the operational status of its
secondary channel. It has the following format:
$PCSI,2<CR><LF>
ABX-3 Response:
$PCSI,ACK,2