CSI Wireless ABX-3, Справочное руководство

Страница: 71 / 113

ABX-3 / MBX-3 Reference Manual 51
Displays the signal to noise ratio of
the satellite signal measured by the external GPS
receiver. This information is parsed from the NMEA $GPGSV or
$PASHS,SAT message strings.
Returns the MBX-3 to the top menu level.
4.5.6 Menu System Shortcuts
There are a number of shortcuts present within the MBX-3’s menu
system that may allow you to navigate through it more efficiently. A
shortcut allows you to move from one menu directly to separate menu
without having to choose the
Back
menu item.
When
Stn/B
of the
Beacon Status
menu is in focus, you may press
to proceed directly to the
Tune
command line of the
Setup
menu. You
may then press again to change the frequency and bit rate to which
the receiver is tuned using the and keys. When the correct
frequency and bit rate are displayed, press a third time to tune the
receiver and return to the
Beacon Status
menu.
When
Unselected BX
of the
Beacon Status
menu, is in focus, you may
press to proceed directly to the
Select Beacon
menu item of the
Setup
menu. You may then press again to select a specific beacon
by geographic region by name using the , and keys. When the
correct beacon name is displayed, press to tune the receiver and
return to the
Beacon Status
menu.
In MBX-E mode, when
Lat
of the Position Status is in focus, you may
press to proceed directly to the
Beacon Status
menu, allowing you
to monitor beacon receiver performance quickly.
In MBX-E mode, when,
SV Count
is in focus, you may press to
proceed directly to the
Satellites
status menu.
S N R S N R
B a c k B a c k