Installation Instructions
32", 42", and 50"
3
For the frame to properly fit it must completely cover the bezel
on the display.
Use the figure below and the Display Compatability Tables on
page 4 to determine if frame will work with display.
The frame will fit the display if the top, side and bottom bezels
on display all measure less than 4 ½" (114mm).
To make sure frame fits display:
1.
Measure width of upper bezel on display.
2.
Measure the distance from the top of display to the inside of
the upper bezel (Edge of screen).
3.
Record measurement.
4.
Measure width of side bezels on display.
5.
Measure the distance from the right or left of display to the
inside of the right or left bezel (edge of screen).
NOTE:
Right and left bezels should be the same so only one
side needs to be measured.
6.
Record measurement.
NOTE:
The left and right side bezels will be the same width so
you only have to do this on one side of your TV.
7.
Measure the width of lower bezel on display.
8.
Measure the distance from the bottom of display to the
inside of the bottom bezel (edge of screen).
9.
Record measurement.
NOTE:
Depending on the brand and model of display, this
measurement may or may not be the same as the width
of the upper bezel.
Figure 1
Step 1
Step 2
Step 3
