Direct acting PRV Mod. VRCD
2
For further information please consult us at: www.comeval.es
Personnel involved in the installation or maintenance of valves should always be alert
to potential emission of water and pipeline material, and take the necessary safety
precautions. Always wear the suitable protection like helmets, gloves, googles, when
dealing and handling hazardous pipelines and valves.
Introduction
This manual will provide you with the information to properly install and maintain CSA direct acting
pressure reducers Mod. VRCD. The contents and the procedure are intended for technicians in
charge of CSA valves only, prior to a theoretical and practical training by CSA qualified or
authorized personnel.
Safety
All safety messages in the instruction manual are flagged with the following symbol meaning
danger, caution and warning. This means and makes reference to procedures that may lead to
equipment and system damage and to severe injury or death for the personnel involved.
Inspection
Your valve VRCD has been packaged to provide protection during shipment, however it can be
damaged during transport. Please carefully inspect the unit for damages or discrepancies with the
order upon arrival and report a claim immediately before unloading the goods.
Parts
Recommended spare parts are listed on the assembly drawing depicted on page 8.These parts
should be stocked to minimize delays in case of malfunction. When ordering spare parts please
make reference to the assembly drawing and indentification plate present on the valve.
