3" [76.2mm]
3 3/8"
[85.7mm]
6"
[152.4mm]
HANDRAIL
HEIGHT PER
LOCAL CODE
AUTHORITY
P-OMAN HANDRAIL
24POMAN
IMPORTANT NOTES
1.
ALL LINEAL MATERIAL TO BE SUPPLIED IN STOCK LENGTHS. POWDER COATED HANDRAIL IN 12'-0", AND ALUMINUM AND
ACROVYN IN LENGTHS UP TO 20'-0". THIS MATERIAL IS TO BE FIELD CUT USING QUALITY EQUIPMENT TO INSURE THAT ALL CUTS
ARE SQUARE. WHEN CUTTING MATERIAL SECTIONS, C/S RECOMMENDS USING AN 80-100 TOOTH CARBIDE TIPPED SAW BLADE
OR EQUIVALENT, TO MINIMIZE CHIPPING AND MAINTAIN JOINT ALIGNMENT.
2.
ALL DIMENSIONS ARE TYPICAL.
3.
FOR DRYWALL/PLASTER WALL CONSTRUCTION, IT IS RECOMMENDED FOR FASTENERS TO BE ENGAGED INTO METAL/WOOD
STUDS TO MAINTAIN MAXIMUM PULLOUT STRENGTH. IF DURING INSTALLATION YOU ENCOUNTER SPECIAL WALL CONDITIONS
THAT DO NOT ALLOW FOR DIRECT ATTACHMENT TO STUDS PLEASE CONSULT THE LOCAL AUTHORITY HAVING JURISDICTION.
4.
INSTALL OUTSIDE CORNERS FIRST.
5.
INSTALL LONGEST RUN OF HANDRAIL FIRST.
6.
ALUMINUM RETAINER SPLICE SHOULD NOT EXCEED 3" [76.2mm] DISTANCE FROM A BRACKET.
7.
THE DISTANCE BETWEEN AN ACROVYN SPLICE JOINT AND AN ALUMINUM RETAINER SPLICE JOINT SHOULD NOT BE LESS THAN
12" [304.8mm].
8.
MATERIAL MUST REACH 65°F MIN. TO 75° MAX. 24 HOURS PRIOR TO INSTALLATION. THIS IS ESSENTIAL TO MINIMIZE EXPANSION
AND CONTRACTION.
9.
MAY REQUIRE USE OF FIRE PUTTY WHEN INSTALLED ON FIRE WALL WITH TOGGLE BOLTS. REFERENCE INSTRUCTIONS
24FIREPUTTY FOR FIRE PUTTY INSTALLATION.
10. THIS HANDRAIL REQUIRES A MINIMUM OF 2 MOUNTING BRACKETS PER UNIT. THE MINIMUM END CAP-TO-END CAP HANDRAIL
LENGTH IS 13 3/4" [349.1mm].
11. FOR MORE INFORMATION ON P-OMAN HANDRAIL SEE OUR WEBSITE AT www.c-sgroup.com.
SECTIONAL VIEW
PLEASE READ
PLEASE READ THESE INSTRUCTIONS THOROUGHLY
PRIOR TO BEGINNING THE
P-OMAN HANDRAIL
INSTALLATION!
THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A
SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION
OF THIS
P-OMAN HANDRAIL
. CONTAINED WITHIN IS
THE TECHNICAL INFORMATION AND INSTALLATION
TECHNIQUES REQUIRED TO COMPLETE AN EFFICIENT,
NEAT AND LONG-LASTING INSTALLATION.
INSPECT ALL MATERIALS FOR DAMAGE OR MISSING
PARTS. IF YOU DISCOVER DAMAGED OR MISSING
MATERIALS, IN THE USA PLEASE NOTIFY THE FACTORY
AT (800) 233-8493, AND IN CANADA (888) 895-8955 FOR
CUSTOMER SERVICE.
P-OMAN HANDRAIL
MUST BE INSTALLED IN
ACCORDANCE WITH THESE INSTRUCTIONS! FAILURE
TO FOLLOW THESE INSTRUCTIONS MAY VOID ANY
PRODUCT WARRANTIES AND RESULT IN AN
UNSUCCESSFUL INSTALLATION. FOR SPECIFIC
QUESTIONS REGARDING THE INSTALLATION OF THIS
P-OMAN HANDRAIL
PLEASE CALL THE FACTORY IN
THE USA AT (800) 233-8493 OR EMAIL
[email protected]. IN CANADA CALL
(888) 895-8955 .
1 1/2"
[38.1mm]
Doc#: II-24POMAN
Issue Date: 03/23/10
Rev Date: 11/09/18
