Operation
VX 570 English V1.10
Seite 39 von 44
11.3.5 Settings Outputs 4..20mA
Settings
→
4-20mA
Settings
→
4-20mA
→
Channel 1
To make changes, first select an item with
„>“
and confirm selection by pressing
„OK“
.
The 4-20 mA Analogue output of the Sensor
VX 570 can be individually adjusted.
It is possible to assign following values
„Temperature“
,
„Velocity
“
„Flow“
and
„Pressure“
to the channel.
To make changes, select the menu item with
the
„>“
key and then select the corresponding
measured variable with the
"OK"
key or
deactivate the 4-20mA output with
"free"
.
For the selected measurand, the corresponding
units can be selected under
"Unit".
Select with key "
>"
and afterwards select with
key
"OK"
the corresponding measurand.
Here example for flow rate, procedure for flow
velocity, temperature and pressure is analog.
Accept the entries by pressing
"Save"
, discard
the changes by pressing
"Cancel"
.
Change to the settings menu with
"Back"
.
0.0 m³/h
1098.9 m³/h
169,8 m/s 1098.9 m³/h
0.0 m³/h
1098.9 m³/h
169,8 m/s 1098.9 m³/h