CS Instruments PI 500, Инструкция по установке и эксплуатации

Страница: 3 / 93

Table of Contents
PI 500 Seite 3 von 93
II. Table of Contents
II. TABLE OF CONTENTS 3
1 SAFETY INSTRUCTIONS 6
1.1 Generell 6
1.2 Installation 7
2 APPLICATION AREA 8
3 TECHNICAL DATA PI 500 9
4 INPUT SIGNALS EXT. SENSOR PI 500 10
5 CABLE CROSS SECTION 10
5.1 Sensor circuit points/Output signal: 10
6 CONNECTION DIAGRAMS OF THE DIFFERENT SENSOR TYPES 11
6.1 Connector pin assignment for all sensors at PI 500 11
6.2 Connection CS dew point sensors series FA 415/FA 300 12
6.3 Connection for CS dew point- and consumption sensors, series FA/VA 400 12
6.4 Connection for CS dew point- and consumption sensors, series FA/VA 5xx 12
6.5 Connection pulse sensors 13
6.6 Analogue two-, three-, and four-wire current signal 14
6.7 Three- and four-wire power supply 0 - 1/10/30 VDC 15
6.8 Two-, three- and four-wire connector pin assignments for PT100/PT1000/KTY81 16
6.9 Connection with RS485 16
7 OPERATION PI 500 17
7.1 Keypad 17
7.1.1 On- and Off-button 17
7.1.2 Brightness buttons 17
7.1.3 Screenshot-Button 17
7.1.3.1 Storing Screenshot 17
7.1.3.2 Export Screenshots 18
7.2 Touchpanel 20