Crystal RS363SF X9, Руководство пользователя, Страница: 12 / 30

RS363SF X9 User Guide
Table 2. Fixed Mounting Brackets Parts
The image shown
may not depict the
product received.
Figure 1. Fixed Mounting Brackets
INSTALLING THE PRODUCT IN AN EQUIPMENT RACK
Using Fixed Mounting Brackets
To install the product with fixed mounting brackets in an equipment rack, complete the
steps and see
Figure 1 below:
1. Line up eight holes on the sides of the rear mounting brackets with eight holes on the
sides of the chassis and secure with 16 (eight per side) 8-32 x 0.375” screws provided (see
#2 in Figure 1).
It may not be possible to line up all holes. If more than three holes do not line up on
each side, please contact
Technical Support .
2. Line up four holes on the front mounting ears at the desired level on the front of the
equipment rack, and attach to the rack using four (two per side) 10-32 x 0.75” rack screws
provided (see #3 in Figure 1). (These will go through the holes in the front of the server).
3. Line up four holes on the rear mounting ears at the desired level on the rear of the
equipment rack, and attach to the rack using four (two per side) 10-32 x 0.50” rack screws
provided (see #4 in Figure 1).
ITEM DESCRIPTION
1 MOUNTING EAR, EXTENDED SLOT
2 SCREW, 8-32 X 0.375", 82D PHL FH, SS
3 SCREW, PHIL TRUSS HEAD 10-32 X 0.75"
4 SCREW, PHIL TRUSS HEAD 10-32 X 0.50”
RS363SF X9 User Guide Page 10 of 26