Crystal Mini 40, Инструкция по установке и эксплуатации

Страница: 16 / 27

4. Use
15
Step 1 : Press to switch on your pump.
Step 2 : Press to switch from one mode to another until the heating mode is displayed.
Step 3 : Using buttons and select the required
temperature. EXAMPLE:
If the current temperature is 18.8°C, default setting temperature is 27°required temperature is 30°
C.
Current water temperature Required water temperature
Useful information about how the heating mode operates
When the incoming water temperature is less than or equal to the required temperature (set point
temperature) -X°C, the heat pump will switch to heating mode. The compressor will stop when the
temperature of the incoming water is greater than or equal to the required temperature (set point
temperature).
Temperature deviation value X setting
X : adjustable parameter from 1° to 18°C, default setting of temperature deviation value is 1°C.
(Parameter
“P01”)
4.3 Heat M e