Crystal LAN CS8920 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 67

Crystal LAN CS8920 Скачать руководство пользователя страница 2

AN84REV1

2

CS8920 Technical Reference Manual

The information contained in this document is subject to change without notice. Crystal
Semiconductor Corporation makes no warranty of any kind with regard to this material
including, but not limited to, the implied warranties of merchant ability and fitness for a
particular purpose. Crystal Semiconductor Corporation shall not be liable for errors contained
herein or for incidental or consequential damages in connection with the furnishing,
performance, or use of this material.

This document contains information which is protected by copyright. All rights reserved. No
part of this document may be photocopied, reproduced, or translated to another language
without the prior written consent of Crystal Semiconductor Corporation.

The following are trademarks of Crystal Semiconductor: StreamTransfer, PacketPage, and
SMART Analog

Other trademarks used in this Technical Reference Manual include:

Ethernet is a registered trademark of Xerox Corp.

Artisoft and LANtastic are registered trademarks of Artisoft, Inc.

Banyan and VINES are registered trademarks of Banyan Systems.

Digital and PATHWORKS are registered trademarks of Digital Equipment Corporation.

Intel is a registered trademark of Intel Corporation.

LAN Server and IBM are registered trademarks of International Business Machines Corp.

Microsoft, LAN Manager, Windows 95, Windows for Workgroups, and Windows NT are
registered trademarks of Microsoft.

Novell and Netware are registered trademarks of Novell, Inc.

SCO is a registered trademark of Santa Cruz Organization, Inc.

UNIX is a registered trademark of AT&T Technologies, Inc.

Other product names may be trademarks of their respective companies.

«
1
2
3
4
...
»

Содержание LAN CS8920




































































Отзывы:

Нет отзывов