Crystal DB477C Скачать руководство пользователя страница 43

Страница: 43 / 44

repair or replace (at our option) any materials or workmanship which we are satisﬁed do not meet

manufacturers specifications.
2.5 We warrant that we will perform services with reasonable care and skill and agree to investigate

any complaint regarding our services made in good faith. If we are satisﬁed that the complaint is

justiﬁed, and as our sole liability to you under this warranty (to the extent permitted at law), we agree

to supply those services again at no extra charge to you.
2.6 To make a warranty claim you must before the end of the applicable warranty period, at your

own cost, return the goods you allege do not meet manufacturers specifications, provide written

details of the alleged defect, and give us an original or copy of the purchase receipt, sales invoice or

some other evidence showing details of the transaction.
2.7 Send your claim to: TDJ Australia PTY LTD. 78 Mills Road, Braeside Melbourne

Victoria 3195, Australia,

TEL: 03 8587 8898 FAX: 03 8587 8866

Email: [email protected]

2.8 If we determine that your goods do not meet manufacturers specifications, we will pay for the

cost of returning the repaired or replaced goods to you. If we find your goods meet manufacturers

specifications and no major defect is found, we will contact you to arrange the return of the goods at

your expense.

Содержание DB477C













































Результаты поиска

Содержание DB477C

Отзывы:

Бренды по названию

Популярные бренды

Crystal DB477C, Руководство пользователя

Результаты поиска

Содержание DB477C

Отзывы:

Бренды по названию

Популярные бренды