21
1.
Press and hold
key for over 2s to enter general setting menu.
2.
Press
or
to select the desired function option.
3.
Turn selector knob to select the desired setup.
4.
Press
to confirm and exit.
Meanwhile, if you want to edit channel name or start up menu, press
or
to move forward or backward, Press
to store and
exit.
General Setting
transmit the pre-stored DTMF signaling.
In DTMF signaling mode,press
for 2s until LCD displays "AN---",
turn selector knob to select desired digit (the other party ID).In this mode,
press
to confirm exist digit and move cursor to next, press
to forward cursor.After editing, press
key to operate ANI call.
"
2TONE
": The channel will be mute
by a 2-Tone signal. The speaker
won’t be open until receiving a
correspondent 2-Tone signal. Hold
"PTT" then press [UP] or press
"
5Tone
": The channel will be mute
by a 5-Tone signal. The Speaker
won’t be open until receiving a
correspondent 5-Tone signal. Hold
"PTT" then press [UP] or Press
In 5Tone signaling mode, press
for 2s until LCD displays "AN---",
turn selector knob to select desired digit(caller ID). In this mode, press
to confirm exist digit and move cursor to next, press
to
forward cursor.After editing, press
key to operate ANI call.
5.
Press
key to confirm and exit.
Sending 2-Tone Call
1.
Press and hold
key for over 2s to enter general setting menu.
2.
Press
/
key to choose No.03
menu, LCD displays "
2TON XX
", "
XX
"
indicates the group in the list.
3.
Turn selector knob to select the desired sending 2TONE group,
Press PTT to transmit selected group.
4.
Total: 32groups, 00-31, Default: 00.
5.
Press
key to confirm and exit.
DTMF, DTMF ANI, 2Tone or 5Tone Signaling
DTMF/5Tone/2Tone signalling function as similarily as CTCSS/DCS.
Without receiving correspondent tone signalling, the speaker will remain
mute. DTMF and 5Tone signalling can be applied for other advanced
features such as ANI, PTT ID, group call, remotely stun, remotely kill,
waken,...etc.. The signalling edition must be done through programming
software. Please refer to the HELP option in the programming software
to know how to operate these features.
1.
Press and hold
key for over
2s to enter into general setting
menu.
2.
Press
/
to choose No.2
menu, LCD displays "
T-OFF
".
3.
Turn selector knob to select the desired setup.
"
DTMF
": The channel will be mute by a DTMF signal. The
speaker won’t be open until receiving a correspondent DTMF
signal. Hold "PTT" then press [UP] or press
directly to
Содержание DB477C
Страница 1: ...1 DB477C Version 3 ...
Страница 39: ...39 Notes ...
