Crystal Vision
Hardware installation
Rear module connections with RM25
The RM25 quad height module will only fit the 2U and 4U frames. With this rear module,
cards can be inserted in the top two and bottom slots.
RM25 rear module connector
Description
RM25
•
18 ADDEC-210 modules
per Indigo 4 frame
•
9 per Indigo 2 frame
•
Slots 1, 2 &4 of each bay
can be used.
•
The Indigo 1 and Indigo
DT will not accept the
RM25 rear module
BNC
I/O assignment
SDI OUT
Serial digital output
V/R IN / SDI OUT
Component V and R input / Serial digital output (link selectable)
Y/G/YCY/CVBS IN
Component Y and G, Composite YC-Y and PAL/NTSC input
Y/G/YCY/CVBS IN
LOOP
Component Y and G, Composite YC-Y and PAL/NTSC input (looped on
rear module)
U/B/YCC IN / SDI OUT
Component U and B, Composite YC-C input / Serial digital output (link
selectable)
SDI OUT / RGB SYNC
Serial digital output / External RGB reference input (link selectable)
U/B/YCC IN
Component U and B, Composite YC-C input
SYNC IN LOOP
Composite sync (B & B) input loop-through (looped on rear module)
SYNC IN
Composite sync (B & B) input
Rear module connections with RM27
The RM27 is a dual height rear module. This module also has the benefit of a BNC
connection for the Audio follow pulse.
RM27 rear module connector
Description
RM27
•
12 ADDEC-210 modules
per Indigo 4 frame
•
Six per Indigo 2 frame
•
Three per Indigo 1 frame
•
1 per Indigo DT
•
Every other slot can be
used
ADDEC-210 User Manual R1.5
8
16 November 2018
