Crystal Vision
Card edge operation
3.3 Reading card edge LEDs
Card edge LEDs may be used in conjunction with status information from any connected
remote status panel display or from Statesman if available.
Refer also to the trouble-shooting chapter for more help with solving problems and
monitoring status information.
The following table summarises the card edge LED functions and colours:
Name
Led
Colour
Function when ON
Freeze
Red
Illuminates if picture freeze is selected.
PSU
Green
Good power supply (PSU) rails. (Bottom LED)
Ref
Green
External reference present (not RGB sync)
Input
Green
Video input present
3.4 Card edge configuration
Input Video format
Selecting the Input video format
The ADDEC-210 can be configured to accept four analogue video input formats,
PAL/NTSC composite or YC and Component YUV or RGB.
Lever
Function
CVBS
Y/C
YUV
RGsB
RsGsBs RGBS
1
Input format
Up
Down
Up
Down
Down
Set links
PL9/11
2
Up
Up
Down
Down
Down
3
Up
Up
Up
Up
Down
Betacam format
The ADDEC-210 is able to accept 525-line Betacam YPrPb format input where the PrPb
component has been boosted in amplitude by 1.333.
Betacam levels are selected by DIL switch 4.
Function
UP
Normal
DOWN
β
c
Sets YUV gains to accept Betacam video Chroma amplitudes
ADDEC-210 User Manual R1.5
16
16 November 2018
