31
Web Port: Video signal transmit port for remote viewing. (Default: 80).
Net Diagnose Info: Enable / Disable Network status.
Network Status: Display current network status.
Healthy Network: NVR system is connected to the internet.
Network cable disconnected / Gateway unreachable: NVR system is not
connected to the internet.
Note:
Remote view will only work when NVR is connected to the router and connected to the
internet.
DHCP is Enable by the default
If the NVR system is connected to the internet, the ‘network status’ will display ‘healthy
network’
If you have an issue with automatic DHCP, you can disable the DHCP and manually
configure the IP address. Please refer to your router information.
5.3.3.2 DDNS
Function: Enable customer DDNS services
DDNS Function: Enable / Disable DDNS
DDNS Provider: Select from list of custom DDNS services providers
URL: Enter customer URL address. (Must be register with DDNS services providers first)
Username: Enter the username of the DDNS provider
Password: Enter the password for the username information above.
Test: Test the DDNS connection setup
Reset All: Reset all the DDNS information.
