Crystal Vision
Using the front control panel
ARC-10MC User Manual R2.8
25
20/11/2009
Video Control Menu (ARC, WSS and Video index)
Aspect ratio, video indexing, detail enhancement, gains and custom ratios are all
controlled from this menu.
ARC-10MC Video control menu
Description
From the Home menu, press F1 to select the Control menu,
which is then traversed by rotating the shaft control.
Rotate shaft encoder to select the Aspect Ratio.
Press F2 to select to change the selection.
Rotate shaft encoder to make a new selection.
16:9-4:3 Full Screen, 4:3-16.9 Full Screen,
16:9-14:9Letterbox, 4:3-14:9 Pillarbox, 16:9-4:3 Letterbox,
4:3-16:9 Pillarbox, No Conversion, User Specified.
Press ENTER to accept the new selection.
Rotate shaft encoder to select the Video Index Bypass control.
Press F2 to select to change the selection.
Rotate shaft encoder to make a new selection.
Input Not Used. Bypass 4:3 Inputs, Bypass 16:9 Inputs.
Press ENTER to accept the new selection.
Rotate shaft encoder to select the Video Index Insert control.
Press F2 to select to change the selection.
Rotate shaft encoder to make a new selection.
Pass, Output 4:3, Output 16:9, Blank.
Press ENTER to accept the new selection.
Rotate shaft encoder to select the Wide Screen Signalling
control.
Press F2 to select to change the selection.
Rotate shaft encoder to make a new selection.
Input Not Used. Bypass 4:3 Inputs, Bypass 16:9 Inputs.
Press ENTER to accept the new selection.
Rotate shaft encoder to select the WSS Output Insert control.
Press F2 to select to change the selection.
Rotate shaft encoder to make a new selection.
WSS Auto, WSS Blank, WSS Bypass, WSS Full 4:3, WSS
Box 14:9, WSS Box 16:9, WSS Full 16:9.
Press ENTER to accept the new selection.
Rotate shaft encoder to select the Detail control.
Press F2 to select to change the value.
Rotate shaft encoder to set the new value
(0-50).
Press ENTER to accept the new value.
Rotate shaft encoder to select Horizontal Position.
Press F2 to select to change the value.
Rotate shaft encoder to select value (
±
200 samples).
Press ENTER to accept the new value.
