Crystal Vision
Card edge operation
ADDEC-310 User Manual R1.2
17
10/12/2007
Using presets
To enter the preset menu set DIL switch lever 2 DOWN.
Description
Examples and comments
ADJ funct
Save, 1
↓↑
Recall, 8
↓↑
0-F
Presets 1-16
These menus allow the saving and recall of user
presets
To save the current ADDEC-310 set up as a
preset proceed as follows:
•
Select the required pre-set 1 to 16 with the
SELECT switch. Press Menu lever 1
DOWN then UP to save the preset
To recall a preset proceed as follows:
•
Select the required pre-set 1 to 16 with the
SELECT control (SW 3)
Press Menu lever 8 DOWN then UP to recall
the preset
N/A
Set up menu
To enter the set up menu set DIL switch lever 3 DOWN.
Selecting the video delay or offset
This sets the number of lines or pixels to be delayed in Delay Mode, or the vertical timing
offset with respect to the reference input in Synchronisation Mode.
Setting the video delay in lines
To select the video frame synchroniser video delay or vertical offset in lines turn the
SELECT control to display
[Line F ‘nnn’]
or for a courser control
[Line C ‘nnn’]
,
and
then
turn the ADJUST control to select the desired delay.
Setting the fine video delay
This sets the number of pixels to be delayed by in the Delay Mode, or the horizontal
timing offset with respect to the reference input in Synchronisation Mode.
To select the video frame synchroniser video fine delay or horizontal offset, turn the
SELECT control to display
[Smpl F ‘nnnn’]
or for a courser control
[Smpl C ‘nnnn’]
,
and then
turn the ADJUST control to select the desired delay.
