Crystal Vision
Hardware installation
6
26/01/06
2 Hardware installation
The ADDEC single height module uses the RM01, RM23, RM24, RM25 and RM27 rear
connector. The RM25 quad height module will only fit into the 2U and 4U frames,
although the rest will fit into all Crystal Vision rack frames. All modules can be plugged
in and removed while the frame is powered without damage.
2.1 Rear modules and signal I/O
The Indigo 4 4U frame will house up to 24 single height modules with up to three power
supplies. The FR2AV and Indigo 2 2U frames will house up to 12 single height modules
and dual power supplies. The FR1AV and Indigo 1 1U frames will house six single height
modules and a single power supply. The DTBAV and Indigo desk top boxes both have a
built-in power supply and will house up to two single height modules.
Note:
For details of fitting rear connectors please refer to the appropriate frame manual
Rear module connections with RM01
The RM01being a single height module will allow maximum packing density with the
maximum number of outputs available.
RM01 rear module connector
Description
RM01
•
24 ADDEC-200 modules
per Indigo 4 frame
•
12 per FR2AV or Indigo
2 frame
•
Six per FR1AV or Indigo
1 frame
•
2 per Indigo DT
•
All frame slots can be
used
BNC
I/O assignment
SDI OUT
Serial digital output
SDI OUT
Serial digital output
V/SDI OUT
Component V / SDI OUT (link selectable)
Y/ PAL/NTSC
Component Y, YC-Y / PAL/NTSC IN
U/C IN SDI OUT
Component U / YC-C / Serial digital output (link selectable)
SYNC IN
Composite sync (B & B) input
