Crystal Vision
Active Control Panel
21
26/01/06
Rotate the shaft encoder and the bottom row will display the successfully polled cards by
name and location or slot number.
In the example above, the card displayed is located in the first frame in slot number 1.
When the desired card is selected press the ENTER key to access that card’s HOME
menu.
The message shows that an ADDEC-200 has been selected with the version of software
on the module as V1.00.
The ADDEC200 home menu
Updating the display
The values displayed on an active front panel are only updated when an adjustment is
made and when changing menu level. If mode changes occur through the use of
Statesman, card edge controls or through automatic response to the input video signal, the
text displayed on the active front panel will not be updated immediately. If necessary,
press CAL to update the display.
The ADDEC-200 menu structure
The main top-level menu is obtained by pressing the F1 HOME menu. Menu keys are
illuminated when active and when further menus are available.
Pressing the Function keys F1-4 accesses the ADDEC-200s sub menus. When a sub menu
has been selected, further options can be accessed by further use of the function buttons.
Where adjustments are available rotating the shaft will then make the required change. An
adjacent LED illuminating indicates an active key. All key presses and numeric value
changes are implemented immediately.
The following chart shows the available ADDEC-200 menus. The actual menus available
may vary slightly as software is updated.