20
Paging the handset
If you have misplaced the handset(and it is in range of the fire), you can
page it by pressing the + button only on the fire control for around 5
seconds. The handset will flash and make a noise to help you to locate it.
Once you pick up the TESC it knows you hold it and so the sound stops. The
flashing and sound will last for 60 seconds each time the handset is paged as
described. If not found in 60 seconds, page again and so on. NOTE: PRESS
“+” Button ONLY , NOT “+” and “-‘ Together as you will accidentally break
the handset pairing and have to reset handset to factory state and pair
again ( see other parts of the booklet if this happens).
Advanced settings Menu
In the event that you may want to change the other preset settings of the
control features. Do not do a long press and hold above but a normal short
press and release will take you into the advanced settings area.
Advanced settings options are:-
•
Back light –
o
A = Automatic (default setting). The back light comes on in the
dark but not in the light.
o
0 = Light never comes on.
o
1 = Light comes on when ever handset is unlocked.
•
Display contrast – 8 levels from 0 to 7 (default level 4) .
•
P = pairing with other devices other than the fire control. The
hand set can pair with other modules to :-
o
L= Operate an electric light – which is the dimmable in 9 steps
o
F= operate an electric fan –which can have 9 speed levels
o
A= operate an auxiliary contact to operate another device.
Other Modes than Manual mode
Depending upon the model of Fire your handset maybe enabled to have some
automatic features, namely, Thermostat mode, timed thermostat mode and
snooze mode. Snooze mode can be selected to work with in conjunction with
either manual or thermostatic modes.
