Crystal Enterprises Barrica Series, Руководство по сборке

Страница: 11 / 20

11
At this point, make sure that the pool is round before start the
following step (fig. 18). Check the guides make a perfect circle and it
adapts to the circumference, previously marked
(7. PLACEMENT OF THE LOW METAL GUIDES).
Before the liner’s installation, place a protective floor cover or put a
sieved and thin sand layer (without stones) on the inner area with a
thickness of 5 cm. Use a rake to ensure that the sand layer doesn’t
have slopes (fig. 19).
Important: Once the floor cover or the sand layer have been put
down, put more clean sand (without any stone or strange objects)
creating a triangular chock of 20 cm. base and 20 cm height. In this
way we’ll avoid the water pressure damage or slide the liner under
the wall, and the water forces will be distributed uniformly (fig. 20).
Before installing the liner, we recommend to put a plastic sheeting
between the sand and the liner, to give more protection to the liner.
fig. 18
fig.19
fig. 20
10. INSTALLATION OF THE PVC LINING (LINER) (L)
Important: Install the liner with 2 (or more) people. The PVC used for our liners has been developed to
withstand exposure to heat and ultraviolet rays for a long period of time. Therefore, under certain climates and
conditions of use, the liner quality can vary slightly.
Never walk on the liner with your shoes on. Don’t put tools or pieces on the liner. Any cut or damage produced by
a wrong handling will void
the liner’s guarantee (See “Liner’s guarantees”).
The liner is the most important and delicate part of the swimming pool. Don’t use knives or any sharp object to
open the swimming pool bag/container. Carefully separate the liner from the rest of the parts and keep it in a safe
place to avoid undesired holes or damages that could be caused by the tools or the metal wall.
Install the liner on a sunny day, minimum
at 20ºC, so that can easily stretch during the installation. It’s made of
a highly flexible vinyl material, sensitive to the heat so it must be warm when installed in the swimming pool.