CryptoTelecom S-160, Руководство пользователя

Страница: 22 / 86

22
Cable (Cross Cable) connected between S-160 and PC.
9) Connect S-160 to Network with LAN Cable (Straight Cable).
10) Connect PC to Network with LAN Cable (Straight Cable).
11) Set IP address of PC, Subnet Mask and Gateway properly according to Network Environment.
12) Check
After registration of S-160 in PIMA Server (refer to ‘ Use of PIMA Server ’ of ‘ 5. Basic Use ’,
connect to S-160 by Domain Name (Server Name) allocated to S-160.
For example, run Web Browser and input Domain Name allocated to S-160 in URL. In http://s-
160.cryptotelecom.net , ‘S-160’ is to be Name of Server registered in PIMA Server by user.
If the initial page is shown as [Pic. 3-8], check Video of S-160 referring to ‘ 1. Video Check ’. If Video
is seen, set up is properly done.
Pic. 3 ― 8 Initial Page of S-160
3.3 Installation with IP Sharing Device (Router)
1) After checking Video in ‘
1. Installation and Video Check ’,
then go to the next step.
2) Connect S-160 and PC with LAN Cable (Cross Cable).
3)
Cable Connection and Network Setting should be done same as per ‘ 1. Installation and Video
Check ’.
4) Go to Network Setting Page of Administrator’s Page as per 4), 5), 6), 7) of ‘ Static IP Setup ’.
5) Click ‘Static IP Address’ in ‘IP Setting’ of [3-9], and input IP Address, Subnet Mask, Default Gateway
according to Network environment to connected S-160 to.