660-R OPERATING INSTRUCTIONS
Page
9
Remote control
Remote control consists of 16 keys, some of which have dual function
which are activated through the 2
nd
key.
START:
Used to start the rollers
when the system is ready
for a test or restart during
a test.
STOP:
Used to stop the rollers,
any roller that is running
will stop. To stop the test
completely, press
OK
while the DDsp = STP
UP ARROW:
Used for axle selection.
DOWN ARROW:
Used for axle selection
OK:
Press to save results
from the last test step.
LEFT ARROW:
Used for wheel selection
RIGHT ARROW:
Used for wheel selection
DIFF:
Selects imbalance when
both wheels are running.
4WD:
Used to switch test procedure into a special mode that rotates
wheels in opposite directions during all test steps so that prop
shaft does not rotate.
SEC:
Used to initiate secondary brake test
PARK:
Used to initiate parking brake test
OVAL:
Used to initiate ovality measurement
WGHT:
Used for weight input
AXLE:
Used for axle selection
