URC-601 User Manual/
Εγχειρίδιο
Χρήσης
4
2.1.2 Manual code search programming
1. Turn on your TV you want to program to work
with the Crypto URC-601 remote control. Hold
the remote in a straight line in front of your TV at
a distance less than 1 meter.
2. Press and hold down the remote device
mode button
for about 3 seconds until the
red light indicator lights up constantly.
3. Press the
button or the
button one
step at a time until your TV turns off. Every time
you press the
or
buttons the
button will blink once
4. When the TV turns off it means that the
remote have found the correct code for your TV.
5. Press the
button to store the code. The
button light will turn off.
Note:
•
At step 3 you can hold down
or
button constantly until the TV turns off. Attention:
When the TV turns off you must release the
button immediately so that the remote wont go to
the next code.
•
For this feature you can press
to search
forward and
to search backward the code
libraries in the remote control.Given the size of
the code libraries in the remote control, it will take
several minutes to cycle through all the codes
Actions to verify correct programming
Once you have stored on the remote the correct code, check to see if most of the
buttons are working according to the functions of your TV.
Corrective Actions
If any of the buttons do not work properly, you can program those buttons individually
by using the learning function process described in chapter 3.
Содержание URC-601
Страница 1: ...Universal Remote Control for TV DVB T 4 more devices User Manual V1 0 URC 601 ...
Страница 3: ...URC 601 User Manual Εγχειρίδιο Χρήσης 2 1 INTRODUCTION 1 1 Remote Control key Guide ...
Страница 18: ...URC 601 User Manual Εγχειρίδιο Χρήσης 17 1 Εισαγωγή 1 1Περιγραφή Πλήκτρων Τηλεχειριστηρίου ...
