16
File Management
Please choose a file in the file browser and press the
button. The file is now marked with
symbol. Press the
OSD button on the remote control and on the right side of the file browser window appears an option menu with
●
Copy
●
Delete
Choose the option Copy or Delete which you want with
▲
or
▼
button and confirm the selection with the ENTER
button.
Copy
To copy one or more files please attach both external storages (USB-Sticks and Card Memory).
After the confirmation for the option Copy appears on the right side of the file browser the connected storages. Please
choose by using the
▲
or
▼
button the storage where do you want to copy the file and confirm them by pressing the
button.
Now you can choose on the selected storage the target (destination) folder by using the
▲
or
▼
button. By pressing
the
button you can open a folder. If you finds the destination, then you can start the copying with the ENTER
button.
If the copy procedure was successful, a conformation appears on the screen. Confirm them by pressing the ENTER
button. The device returns to the normal file browser view.
Of course, you can copy more than one file at once. Please choose each file and mark them with the
button. Every
file which do you want to copy is now marked with the
√
symbol. The copying procedure is the same as describes
above.
To cancel the file management please press the STOP button and the device returns in the normal file browser view.
Note:
To copy of a 420 MB file from SD Card (2 GB) to an USB-Stick (8 GB) the TMP-2A needs roughly 2 minutes. The copy
time depends on the kind of storages and can be different from them. By using SDHC memory the copying can be
faster.
Delete
After the selection which file do you want to delete and that you want to delete a file a confirmation prompt appears on
the right side of the file browser. If you want to delete, please navigate by using the
�
button to the
√
field and
press the ENTER button. After the confirmation the delete procedure starts.
If the delete procedure was successful, a conformation appears on the screen. Confirm them by pressing the ENTER
button.
