CruzPro WSD110, Руководство пользователя

Страница: 11 / 16

two NMEA 0183 sentences:
$VHVHW,,,,,ss.ss,N,yyy.y,K*CS from a speed log where
ss.ss is Boat Speed in knots or:
$ G P R M C , h h m m s s . s s , A , l l l l . l l , N / S , y y y y y . y y , E /
W,ss.s,ccc.c,ddmmyy,mm.m,E/W,*CS from a GPS where ss.s
is Boat Speed in knots.
The WSD110 outputs Average Wind Speed, Average Wind
Direction and Air Temperature on the white wire. The
following NMEA 0183 sentences are sent:
$WIMWV,ddd,R,sss.s,N,A*CS
$YXXDR,C,tt.t,C*CS
Where sss.ss is Wind Speed in knots, ddd is Wind Direction in
degrees, tt.t is air temperature in degrees C and CS= NMEA
0183 checksum.
Display/Set High Wind Speed Alarm Value
You can set a High Wind Speed alarm to warn you when the unfiltered
Apparent Wind Speed exceeds a particular value. To view/set the
High Wind Speed value, press and hold the
s
key for ten
seconds (until you hear a long beep) while viewing Apparent
Wind Speed. The word “AL” will be displayed. Use the
t
and
s
keys to adjust the value to read correctly. Press the
:
key to
save the new value to memory.
Press the
s
key for 1/2 second to arm the High Wind Speed
alarm. The Alarm Bell icon will be displayed. Press the
t
key
for 1/2 second to disarm the High Wind Speed alarm.
Page 11