CruzPro PcFF80, Руководство пользователя

Страница: 19 / 44

Set the COM Port Number to the COM port number you want such as 3,
4, 5, 6, 7 or 8 (if they are not being used). Set the following parameters as
shown:
USB Transfer Sizes: Receive (Bytes) to 64
Transmit (Bytes) to 64
BM Options Latency Timer (msec) to 5
Options Disable PNP - checked.
Click OK until you get to the Device Manager and close it and any other
open windows (such as the Control Panel). This completes the USB
driver installation and setup.
If using the USB port, be sure to plug the USB connector into the PcFF80
Interface Box and your PC USB port and boot your PC
before connect-
ing +12V power to the Interface Box. Turn off the power to the Interface
Box
before removing the USB cable.
Page 19