CruzPro PcFF80, Руководство пользователя

Страница: 10 / 44

Installation
Mounting and Wiring
The Interface Box (“black box”) should be located in a dry area in where
the temperature does not exceed 50 deg C (120 deg F). The length of the
cable between the Interface Box and the PC should not exceed 2M (6
feet) in length. You have an option of connecting the Interface Box to
your PC with either a RS232 cable connected to a DB-9 nine-pin COM
port or a standard USB port.
The transducer comes supplied with a 6 pin Conexal female connector
that plugs into the 6 pin male Conexal connector on the Interface Box.
Two power leads (red and black) are also wired into the female transducer
connector and are used to power the Interface Box from a su12VDC
power source as shown in Figure 1. The power source should be able to
supply the maximum current of 4.7 amps peak required during high power
Page 10
Figure -1 Red Black
Interface Box