INTERFACING SOLUTIONS
VIMBM-86B
VIDEO IN-MOTION INTEGRATION
FOR SELECT BMW
VEHICLES 2012-UP
www.cruxinterfacing.com
Rev. 102814
5
CONNECTING YOUR DEVICES TO THE INTERFACE
Follow these steps to properly install the interface module.
Step 5
-After making the Fiber-Optic connections, mate the T-Harness. One end goes to the factory 40-Pin harness and the other
end goes to the factory Radio. Our 40-Pin will NOT have a latch to lock, but will not move out of place.
Step 6
- Connect the 8-Pin connector to the module and switch dip switches number 1 and 6 to ON.
DIP SWITCH DESCRIPTION
IF NOT USING THE INPUT, PLACE TO OFF
DIP 1 = Video In-Motion Enable
DIP 2 = Not Used
DIP 3 = Not Used
DIP 4 = Not Used
DIP 5 = Not Used
DIP 6 = CAN Termination
After each change of the DIP switch settings,
we recommend powering down the module,
then restarting the vehicle.
ACTIVATING THE VIDEO IN-MOTION DOES NOT EFFECT THE
FACTORY REAR-VIEW CAMERA, GPS, PARK ASSIST, OR
OTHER VEHICLE INFORMATION
LED INDICATORS
BLUE LED:
ON = Power On
OFF = Power OFF
UP=ON
DOWN=OFF
