INTERFACING SOLUTIONS
VIMBM-86B
VIDEO IN-MOTION INTEGRATION
FOR SELECT BMW
VEHICLES 2012-UP
www.cruxinterfacing.com
Rev. 102814
4
CONNECTING THE INTERFACE
Follow these steps to properly install the interface module.
Step 3
- On the factory 40-Pin connector, remove the factory Fiber-Optic cables. Lift the clip to release the fiber optic connector.
Step 4
- After removing the factory Fiber-Optic cables, re-insert the Factory fiber optic cables into the CRUX T-Harness.
Make sure to insert the fiber optics into the first slot from the outside.