background image

INTERFACING SOLUTIONS

VIMBM-86B

VIDEO IN-MOTION INTEGRATION 

FOR SELECT BMW 

VEHICLES 2012-UP

BMW

2012-2015  1 Series

2012-2015  3 Series

2012-2014  5 Series

2012-2014  X3

2012-2014  X5

APPLICATION NOTES:

WORKS FOR:

NBT 10.2” Radio Displays

Contact Tech Support for more 

information.

PARTS INCLUDED
(1) BM-86B Interface Module
(1) BM-86B 40-Pin Harness
(1) Instruction Sheet

SAFETY PRECAUTIONS
1. Please read through the entire instruction manual before starting any of the installation procedures.
2. We recommend disconnecting the negative side of the battery until ready to code the vehicle.
3. Do not install any of the main modules near any major components or near the HVAC system,
    as placing items near the HVAC may cause damage or overheating to the vehicle or interface.
4. We recommend not disconnecting any of the air bag connections behind the dash panels.
5. This product is under Crux’s 1 year manufacturer’s warranty. Warranty may be voided in the case where 
    the device shows proof of being opened or improper extreme force.

TECH SERVICES
All our products are manufactured under strict quality control. Each device is being tested before shipment. If nevertheless do occur problems or if 
you have technical questions, contact us directly:

Crux Interfacing Solutions Tech Support
1 (855) 822-1348 (Mon - Fri - 9:00 AM - 5:00 PM) Pacific Time

www.cruxinterfacing.com

Rev. 102814

1

Содержание VIMBM-86B








Отзывы: