INTERFACING SOLUTIONS
RVCFD-79
REAR-VIEW INTEGRATION INTERFACE
FOR FORD & LINCOLN VEHICLES 2011-UP
W/ MYFORD TOUCH RADIOS
www.cruxinterfacing.com
Rev. 072214
8
ACTIVATING THE VIDEO IN-MOTION
There are several ways to activate the Video In-Motion, depending on the options available to the vehicle. This page will guide you through the
known options available.
Option 1
- Permanent Activation: By activating dip switch number “1” to the “ON” position the Video In-Motion is permanently active.
Note: With this option active, the GPS antenna (If available) will not be able to update in real time.
OPTION 2
- Non-Permanent: There are some vehicles that will allow you to activate the Video In-Motion through the steering wheel controls.
Currently there are two known SWC types: Be aware that with any of the options other that option 1, dip switch number 1 must be
set to “OFF”. Note: If the vehicle has GPS, deactivating the Video In-Motion will allow you real time updates.
TYPE 1 - Seen on Ford Edge and C-Max.
TYPE 2 - Seen on Ford F-Series vehicles.
Hold the BACK button (Left Arrow) for 3
Hold the PHONE button (OK) for 4 seconds
seconds to activate the Video In-Motion.
to activate the Video In-Motion.
To deactivate - Repeat the step above.
To deactivate - Repeat the step above
54-PIN
(female plug)
TO FACTORY
DISPLAY
------------------
------------------
------------------
54-PIN
(male plug)
8-PIN
(male plug)
WHITE/ NOT USED
4 5 6
ON
1 2 3
4 5 6
ON
1 2 3
C-500
INTERFACE
C-125
INTERFACE
DOES NOT REQUIRE YOU TO
TAP FOR REVERSE SIGNAL
(SIGNAL IS FROM MODULE)
SONY
8” RADIO
WHITE/ REVERSE
12V OUTPUT
CAMERA
NOT INCLUDED
TAP GROUND
ON BLACK WIRE OF
8-PIN CONNECTOR
YELLOW/ VIDEO SIGNAL
STATUS LED’S
STATUS LED’S
8-PIN
(male plug)
CAMERA INPUT
BLACK WIRE/ TAP HERE
OPTIONAL/
TOGGLE SWITCH
ENABLE
DISABLE
GREEN/ VIM
GREEN/ VIM
RED WIRE/ TAP HERE
4 5 6
ON
1 2 3
4 5 6
ON
1 2 3
DIP 1 = OFF
2 = ON
3
4
5
DIP 6 = ON
OFF
FACTORY
GPS
DIP 1
2
3
4
5
DIP 6 = ON
OFF
DIP 1 = ON
2 = ON
3
4
5
DIP 6 = ON
OFF
NO
FACTORY
GPS
DIP 1 = ON
2
3
4
5
DIP 6 = ON
OFF
C-500
INTERFACE
C-125
INTERFACE
SWITCH DIP 1 TO THE “ON”
POSITION FOR PERMANENT
ACTIVATION
ON BOTH C-125 AND
C-500 MODULES.
