INTERFACING SOLUTIONS
RVCCH-75B
REAR-VIEW & FRONT-VIEW CAMERA
INTEGRATION INTERFACE FOR
DODGE & JEEP VEHICLES 2014-UP
www.cruxinterfacing.com
Rev. 051016
5
CONNECTING THE REAR-VIEW CAMERA
In order to activate the Rear-View Camera feature, make sure Dip switch number 2 is set to “ON”.
Step 5
- Make note that the Rear-View Camera is not included and can be purchased separately.
Connect the RED power 12V cable from the camera to the GRAY Reverse (12V) trigger on the T-Harness.
Tap the BLACK wire on the T-Harness 8-Pin connector for the GROUND to the camera.
Be sure to test the camera by placing the vehicle in REVERSE and confirming the camera display.
GRAY/
REVERSE 12V
52-PIN
(male plug)
REAR CAMERA
(NOT INCLUDED)
RED/
POWER 12
BLACK/
GROUND - TAP BLACK WIRE ON
8-PIN
VIDEO
(male plug)
4 5 6
ON
1 2 3
4 5 6
ON
1 2 3
ACTIVATE
REAR-VIEW
& FRONT VIEW
8-PIN
MODULE
12-PIN
(male plug)
STATUS LED’S
DIP 1 = OFF
2 = ON
3 = OFF
4 = ON
5 = OFF
DIP 6 = ON
REAR CAMERA
INPUT
(female plug)
