INTERFACING SOLUTIONS
RVCCH-75B
REAR-VIEW & FRONT-VIEW CAMERA
INTEGRATION INTERFACE FOR
DODGE & JEEP VEHICLES 2014-UP
www.cruxinterfacing.com
Rev. 051016
3
CONNECTING THE INTERFACE
Follow these steps to properly install the CAN module
Step 1
- Remove the factory display to gain access to the factory 52-Pin (RED) connector.
Located behind the display, not the radio. Remove the factory 52-Pin connector.
Step 2
- Using the provided 52-Pin T-Harness, mate both sides of the harness, to the factory harness and the factory display.
