CrustBuster 4740, Руководство пользователя

Страница: 11 / 12

9
Before Unfolding and Operating This Equipment ---
Read and understand this owner's manual.
Transport & Safety Instructions
F
When transporting drill, be aware you are towing a 24,000 lb. load with up to 6,550 lb. empty
hitch weight.
Tow width - 16' Tow length - 34'
Take appropriate precautions in stopping, turning, etc. DO NOT EXCEED 15 MPH.
Grain boxes are to be empty in transport to avoid exceeding the capacity of the 4740
drill center towing tires.
Follow tire manufacturer's recommendations regarding inflation for towing.
(Goodyear farm implement tire for highway and agriculture usage)
Mfg stated capacity @ 90 PSI = 4870 lb.
4740 Drill load per tow tire empty boxes = 4387 lb.
4740 Drill load per tow tire full boxes = 5600 lb.
F
Use a minimum hitch pin of 1" with lock nut to towing vehicle. DO NOT use a hairpin or wire
to secure hitch pin. Make sure adequate safety chains are in place.
F
NEVER use an unsecured pin in draw bar.
F
Before transporting, make sure transport locks are in place on the wing carrier arms located
under the hitch and on tool bar lift cylinders.
F
Lug bolts should be checked prior to towing, after 1 mile of transport, within the next 20 miles
and periodically thereafter. Check hubs for excess heating.
F
Make sure center section drive wheel throw-out pin is disengaged when transporting
F
Make sure 3-point linkages are raised completely to clear hitch.
F
If your tractor does not already have a lighting receptacle, install one. Always plug in the drill
lighting system to a correctly wired tractor and USE for transport safety. Wiring should be
extended into tow tractor for turn and stop light.
F
Connect the 7 pin lighting plug to the tractor receptacle and use at all times. Confirm the
correct lights are operating if your tractor is not wired by industry standard code. Standard 7
pin receptacles are available through your dealer, local truck supply stores, and auto parts
facilities.
F
Before operating hydraulics, remove all transport locks or damage to drill will result.
F
Never have more than 391 lbs. per section on the walkboards without drill securely attached
to tractor or towing vehicle.
CAUTION: Your drill weighs more than the towing vehicle. The drill is NOT
equipped with brakes.
EXERCISE EXTREME CAUTION ! Maximum
allowable speed - 15 mph.
NEVER ALLOW ANYONE TO RIDE THE DRILL!