Setting the brightness of the display (bLI):
Press on the + or – button to select from options 1-5, where 1 is the dimmest and 5 is the brightest
of the display brightness setting. Press on the MODE button (i) to confirm the option and proceed
to the next parameter.
Automatic shut off setting (OFF):
Press on the + or – button to select from options 0-9, where 0 stands for non-active (the display
will not shut off automatically), 1 (display will shut off automatically after 1 minute), 9 (the
display will shut off automatically after 9 minutes). Press on the MODE button (i) to confirm the
option and proceed to the next parameter.
Maintenance warning (nnA):
Press on the + or – button to select from options 0 (OFF - warning not active) or 1 (ON-warning
active). Press on the MODE button (i) to confirm the option and proceed to the next parameter.
If the total distance travelled is 5,000 km (can be adjusted by the manufacturer), the display shows the
SERVICE symbol. When the display is switched on, the total mileage information will flash for 4 seconds,
indicating the necessary maintenance.
Wheel circumference (LUd):
Information only for reading – cannot be adjusted. Press on the MODE button (i) and proceed to
the next parameter.
Speed limit information (SPL):
