Turn on the lighting and backlight of the display:
Press and hold the button for approximately
2 seconds to turn on the display lighting and backlight. To turn off the display lighting and backlight,
use the same method. When the display is turned on in a dark environment, both the display backlight
and the lights are automatically turned on. If the display backlight is switched off manually, it must be
turn back on manually. To turn on the light, the e-bike must be equipped with lighting that is powered
by the battery of the e-bike.
Display data mode selection:
By briefly pressing on the MODE button (i), you can select
between the modes in following order: distance traveled (TRIP), total mileage counter (TOTAL),
maximum speed achieved (MAXS), average speed (AVG), distance remaining (RANGE), your
energy consumption (C)
Battery charge status indicator:
Battery charge level (displays 10 degrees at maximum charge; 1
degree = 10% capacity). If discharge occurs, the battery contour will flash. The battery must be
charged immediately.
Setting the parameters:
If the electric system of the bike is switched on press the MODE button
(i) twice in a row (at an interval of 0.3 seconds) and enter the SETTINGS interface. To leave the
settings interface use the same method.
