Crunch GP508, Руководство пользователя

Страница: 10 / 16

10
INSTALLATION INSTRUCTIONS
MECHANICAL INSTALLATION
Before you start with the installation of the sound system, disconnect necessarily the GROUND connection wire from the
battery to avoid any risk of electric shocks and short circuits.
Avoid any damages on the components of the vehicle like air bags, cables, board computer, seat belts, gastank or the like.
Ensure that the chosen location provides a sufficient air circulation for the sound system. Do not mount the device into small or sealed
spaces without air circulation near by heat dispersing parts or electrical parts of the vehicle.
The wires and cables of power supply and the audio signal must be as short as possible to avoid any losses and interferences.
NOTE
1
3
2
4
Attach the two mounting holders on the bottom side of the
sound system. Then you need to find a suitable installa-
tion location for the sound system. Ensure that enough
space for the installation of the cables remains and that
they will not be bended and have sufficient pull relief.
Lay the sound system aside and then drill the holes for
the mounting screws at the marked locations. Please en-
sure not to damage any components of the vehicle while
you drilling the holes. Alternatively (depends on the mate-
rial of the surface) you can also use self-tapping screws.
Keep the sound system at the chosen mounting loca-
tion in the vehicle. Then mark the four drill holes with an
appropriate pen or peening tool through the designated
mounting holes at the sound system.
Then uphold the sound system to the chosen position and
fix the screws through the mounting holes into the drilled
screwholes.
Ensure that the mounted sound system is tightly fixed and
can not come loose while driving.