Crumar MOJO, Руководство пользователя

Страница: 15 / 28

15
Tonewheel Generator Set * – The VB3 CE 2 software is able to model 20 different
tonewheel organs. The settings are based on measurements taken from specific organs of
different models and dates of manufacture. Changing the Tonewheel Generator Set is like
choosing to use a different organ. When the Tonewheel Generator Set is changed, none of
the other parameters or EQ settings are changed. Any apparent differences in sound are
solely a result of the different measurements from the organ on which the tonewheel set is
based.
The Tonewheel Generator Set can be changed from the CRUMAR Mojo control panel by
pressing “Shift” and using Upper Manual Preset buttons 1 and 2 to scroll through the
different sets. When preset button 1 is lit up, the first tonewheel set in the list, “1. VB3CE2
Standard,” is selected.
Generator Leakage – This parameter controls the amount of ambient noise created by the
magnetic interaction of the tonewheels of an organ.
Generator Xtalk * – This parameter controls the amount of overtones, often referred to as
“Cross Talk,” created by the interaction of the different drawbar settings. The Generator
Xtalk parameter can be adjusted from the CRUMAR Mojo control panel by pressing “Shift”
and turning the “Drive” knob.
Percussion Volume * – This parameter controls the volume of the harmonic percussion
effect when it is enabled on the panel of the CRUMAR Mojo. The Percussion Volume
parameter can be adjusted from the CRUMAR Mojo control panel by pressing “Shift” and
turning the “Treble” knob.
Percussion Length – This parameter controls the length of the decay of the harmonic
percussion effect.
Percussion Dropout – This parameter controls the amount of volume reduction of the
drawbars when the percussion volume is not set to “Soft.”
Pedals Sustain * – This parameter controls the amount of the sustain of the pedal
drawbar sound. The Pedals Sustain parameter can be adjusted from the CRUMAR Mojo
control panel by pressing shift and adjusting the 8' drawbar.
Pedals To Lower * – This parameter controls the addition of the tones from the pedal
drawbars to the bottom two octaves of the lower manual. The pedal tones can also be
added by pressing the “Pedal to Lower” button on the CRUMAR Mojo control panel.
Vibrato Depth – This parameter controls the depth of the vibrato effect. Unlike other
parameters where a change to the setting is immediately audible, the effect of adjusting
this parameter is not heard until the Vibrato/Chorus type is changed from the panel of the
CRUMAR Mojo.
V/C Mix – This parameter controls the mix between the vibrato or chorus effects and the
base tone of the organ. Unlike other parameters where a change to the setting is
immediately audible, the effect of adjusting this parameter is not heard until the
Vibrato/Chorus type is changed from the panel of the CRUMAR Mojo.