Crumar MOJO, Руководство пользователя

Страница: 12 / 28

12
To start up the CRUMAR Mojo, the instrument needs to be powered on and the keyboards
need to be synchronized with the software.
START-UP PROCEDURE:
1. Connect the audio cables, expression pedal, sustain pedal and rotary speaker
control cables.
2. Connect the power supply to the instrument and to the main AC outlet.
3. Press the “Power” button to start the boot-up process. The LED on the “Power”
button lights up.
In some instances, upon first connection to the power supply, pressing the
“Power” button triggers a “false boot-up.” This is caused by the power
supply’s need for a reference on the instrument. Pressing the power
button again starts the boot-up process.
4. The CRUMAR Mojo displays the firmware version by illuminating the appropriate
LEDs on the Upper and Lower preset buttons. For example, if the instrument is
running firmware version 1.3, the LED for the number 1 preset in the Upper
section and the LED for the number 3 preset in the Lower section light up at the
same time.
5. The boot-up process continues as evidenced by the steadily lit LEDs across the
Upper and Lower preset sections. During this process, the instrument starts the
internal software and configures the settings of the various connected
accessories. The boot-up procedure lasts about 20 seconds.
6. After 20 seconds, press any of the keys on either the upper or lower manual.
Once the keys are active, the boot-sequence is completed and the manuals can
be synchronized. Press the “Manual” button or any of the presets on both the
Upper and Lower preset sections to synchronize the keyboards. The boot-
sequence LED pattern stops and the LEDs for any and all related functions light
up.
SHUT-DOWN PROCEDURE:
Hold down the “Power” button for four seconds. All of the LEDs turn off when the
instrument powers down. Please note that the instrument is still under voltage
until the power supply is disconnected. If the instrument will not be used for more
than two hours, it is recommended that the power supply be unplugged from the
main AC connection to extend the life of the power supply and to conserve
energy.
5) START-UP AND SHUT-DOWN PROCEDURES