1.
On the side you will be using as a porch, locate the
two circular eyelets and place the included porch
poles into the eyelet.
2. Tie a knot at the end of the two extra guy lines
provided. Slip the knot over the porch pole and guy
down each pole.
C.) The Flysheet
(ii) Using the porch:
1. Simply place a set of poles from one Modus into the
eyelets of both.
2. Guy down each pole.
D. ) Connecting to Another Modus
(i) Porch:
1.
Place on the extra, connector flyseet.
2. Guy it down securely for protection from the
elements or extra privacy.
D. ) Connecting to Another Modus
(ii) Sleeping:
You loop it..
Swoop it.. and pull!
clip
clip
1. Find suitably spaced trees. You should look for
trees that are roughly 15 ft (4.5 meters) apart. Your
Modus comes with adjustable straps, so there is
flexibility on distance.
2. Wrap tree straps around the tree a minimum of 4.5
ft (1.3 meters) off the ground.
3.
Pull the end with multiple attach points, through the
single loop end. NOTE: based on the size of the tree
or distance between trees, you may need to wrap
the strap around the tree more than once.
4. Use the included carabiner to attach the tree strap
to the webbing at either end of the flysheet.
5.
If the hammock feels too saggy, try to move
the carabiner up to the next adjustment point.
Continue until you find the fit comfort level for you.
D.) The Hammock
1.
Place the flysheet over the base tent lining up the
air-poles with the center seams of the flysheet.
2.
Stake down the head and foot first ensuring that the
flysheet is centered appropriately.
3. Stake down the rest of the guy points. Note: the
guy points on the left and right side of the flysheet
have an elastic rope on them. This is to make it
easier for you to get in and out of the tent when
using the flysheet.
C.) The Flysheet
(i) Covering the Base
NOTE: Your Modus flysheet is reversible. Place the
reflective side in if you want to direct heat into your
tent. Place the reflective side out if you want to
reflect the heat away from your tent.
