PMS 711
2 cyan
85 magenta
76 yellow
10.25.12
CRU Mark
Page 11
11 Technical Specifications
Product Name
RTX800-TR
Interface Types
& Speeds
Thunderbolt: up to 10 Gbps bi-directional
Drive Types Sup-
ported
3.5” SAS and SATA Drives
Data Connectors
Two (2) Thunderbolt connectors
RAID Levels
JBOD, 0, 1, 4, 5, 6, 10, and ATTO DVRAID
Operating
System Require-
ments
•
Windows 7 or 8
•
Windows Server 2012 or 2008 R2 (x64 only)
•
Mac OS X 10.6.8 or later
•
Linux distributions that support the connection
type used
Insertion Rating
50,000 insertions
Compliance
EMI Standard: FCC Part 15 Class A, CE
EMC Standard: EN55022, EN55024
Shipping Weight
•
25 pounds (without drives)
•
37 pounds (with drives)
Product
Dimensions
6.97” x 10.63” x 14.57” (177mm x 270mm x
370mm)
Technical
Support
Your investment in CRU products is backed up
by our free technical support for the lifetime of
the product. Contact us through our website,
www.cru-inc.com/support
or call us at 1-800-
260-9800 or +1-360-816-1800.
©2013 CRU Acquisition Group LLC, ALL RIGHTS RESERVED. RTX®, CRU®, and TrayFree™ are
trademarks of CRU Acquisition Group, LLC and are protected by trademark law. All brands or product
names are trademarks reserved to their respective owners.
Product Warranty and Limitation of Liability:
Product Warranty
CRU warrants this product to be free of significant defects in material and workmanship for a period
of three years from the original date of purchase. CRU’s warranty is nontransferable and is limited to
the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all
other warranties, including but not limited to, the implied warranties of merchantability and fitness
for a particular purpose and non-infringement of third-party rights with respect to the documentation
and hardware. No CRU dealer, agent, or employee is authorized to make any modification, extension,
or addition to this warranty. In no event will CRU or its suppliers be liable for any costs of procurement
of substitute products or services, lost profits, loss of information or data, computer malfunction, or any
other special, indirect, consequential, or incidental damages arising in any way out of the sale of, use
of, or inability to use any CRU product or service, even if CRU has been advised of the possibility of
such damages. In no case shall CRU’s liability exceed the actual money paid for the products at issue.
CRU reserves the right to make modifications and additions to this product without notice or taking
on additional liability.
FCC Compliance Statement:
“This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at this own expense.
In the event that you experience Radio Frequency Interference, you should take the following steps to
resolve the problem:
1) Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
4) Reorient or relocate the receiving antenna.
FOR OFFICE OR COMMERCIAL USE