CRT SS 6900, Руководство пользователя

Страница: 18 / 22

11
This menu is to select frequency of Roger Beep. The frequency range
is 300KHZ—3KHZ. The shift step is 10HZ.
Default: 1050HZ
(11) RBT (ROGER BEEP Holding Time)
This menu is to select Roger Beep Holding Time from 50ms—1000ms.
The shift step is 50ms.
Default: 500ms
(12) CFR (CW Side Tone Frequency)
This menu is to select CW Side Tone Frequency from 300HZ-3KHZ,
the shift step is 10HZ.
Default: 1050HZ
TES: Under transmitting state and ECHO effect is ON, users can hear
their own voice in the radio they are using when TES is ON. You
can switch on or off this function via
CLARIFIER selector.
Default: ON
TNS: Under transmitting state and the ECHO function is OFF, users
can hear their own voice in the radio they are using when TNS
is ON. You can switch on or off this
function via CLARIFIER selector.
Default: OFF
OPERATING PROCEDURE TO RECEIVE
(13) TON (Transmitting Single-Tone Frequency)
This menu is to select Transmitting Single-Tone Frequency from
300HZ-3KHZ. The shift step is 10HZ.
Default: 1050HZ
(14) TX MON
This menu is to set Talkback Monitoring Volume for voice message
sent.
Be sure that power supply, microphone and antenna are
11
connected to the proper connectors before going to the next
step.
Turn the radio on by tuning VOLUME control clockwise.
21
Rotate the VOLUME knob to set a comfortable listening level.
31
SET the MODE switch to the desired mode.
41
Set the CHANNEL selector switch to select the desired channel.
51
Set the RF gain control full clockwise to maximum RF gain.
61
Listen to the background noise from the speaker. Turn the
71
SQUELCH control clockwise slowly until the noise disappears (no
signal should be present). Leave the control at this setting. The
Squelch is now properly adjusted. The receiver will remain quiet
until a signal is actually received. Do not advance the control too
far, or some of the weaker signals can not be heard.
OPERATING PROCEDURE TO TRANSMIT
Select the desired channel of transmission.
11
Press the Push-To-Talk switch on the microphone and speak in a
21
normal voice.